developed especially for grinding nicks in cutting dies. Pneumatic drive for high performance.The damaging of the rubber during grinding is prevented, performance of the diecutter is optimized.
simplified positioning for setting the nicks
 
Available grinding wheel size: 50x8mm or 50x10mm
Grinding Wheel Thickness: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.2mm,1.5mm,2.0mm,
 
Product Parameter : 

			Electricity voltage

			220V

			Maximum Torque

			Adjustable

			No-Load Speed

			0-24000RPM

			Color

			Yellow/Blue/Green

			Automatic Grade

			Semi-Automatic

			Packing

			1set/box

			Net Weight

			2.5kg

			Usage

			Die cutting Nick Grinding

			Dimension

			180*60*68mm

			Delivery tools

			4pcs

			Free grinding wheel per set

			10pcs

			Warranty service

			6 months

Advantage:

1. Versatile pneumatic powered nicking grinder produce clean, perpendicular nicks at consistent&adjustable depths.

2. Operating with less noise and vibration

3. Steady position of the devices on die-boards due to 4 removable pins below the base.

4. Nicks width from 0.2mm to 2.0mm by using different grinding distance thickness.
 
Manual Instructions1. Check the air source, air pressure stable or not 
 
2. Check the machine screws etc.
 
3. Change the grinding wheel according to needs, adjust the depth valve(If not use high precision position, pls lock the depth valve to the rock bottom position, which will do the nick grinding jobs according to the pressure power) 
 
4. Wear gloves, protective glass, masks 
 
5. Connect to air source( suggest to hang up the air hose)
 
6. Pls drop 3 drops pneumatic oil to the air inlet, plug in the air hose. Rotate to right to open the grinder. Then slowly idle for a few seconds, rotate to left to close 
 
7. Put the wooden die cutting board smoothly on the table(suggest not to use sponge rubber before nick grinding, as resistance increases) 
 
8. Rotate to right to open the grinder, increase the speed. Use thumb and first finger to hold the machine when the rotation speed gets stable. Then put the machine in the front side of the steel rules, move it to the grinding position(use wheels to adjust the position) and gently press the machine to start nicking. Move stably in turn. Pay attention that must gently press and handle 
 
9. After finish the nicking job, rotate to left to close. Unplug the air hose and use 3 drops pneumatic oil to the air inlet, then plug to the air hose and open the grinder to idling for a few seconds. After that close the air source, clean the machine body and keep in proper position 
 
Product Picture Show :

Tags:

Nick Electric Grinder Tool Pneumatic

Semi Automatic Nick Electric Grinder Tool

Adjustable Nick Grinder

Products Details

Home > Products >

Nick Grinder

Pneumatic Angle Die Cutting Machine Nick Grinding Adjustable 220V

All Category

Die Cutting Creasing Matrix

Die Cutting Rules

Die Ejection Rubber

Creasing Matrix Cutter

Anvil Cover For Die Cutting

Die Cutting Tool

Nick Grinder

Carton Waste Stripping Machine

Paper Drill Bit

Gravure Printing Doctor Blade

Die Cutting Accessories

Adhesive Double Tape

Paper cutting stick

Cleaning Sponge

Rubber Blanket

Stamping Foil

Pneumatic Angle Die Cutting Machine Nick Grinding Adjustable 220V

Brand Name:	Dechang
Model Number:	DC-NG001
MOQ:	1 Set
Price:	Factory Price
Packaging Details:	1 Set/Export Wooden Carton

Detail Information

Product Description

Detail Information

Place of Origin:

GuangDong , China

Brand Name:

Dechang

Certification:

Model Number:

DC-NG001

Item Name:

Pneumatic Angle Nick Grinder And Handheld Pneumatic Nick Grinder Tools Machine

Type:

Air Pump

Automatic Grade:

Semi-Automatic

Color:

Blue

Weight:

2.8kg

Dimension (L*W*H):

200*180*100MM

Load-Speed:

10000rpm , 10000RPM

Application:

Grinding Nick In Solid Corrugated Board .

Package Type:

30*25*18cm

Single Gross Weight:

3Kgs

Minimum Order Quantity:

1 Set

Price:

Factory Price

Packaging Details:

1 Set/Export Wooden Carton

Delivery Time:

3~5 days after recived the deposit

Highlight:

Die Cutting Machine Nick Grinding Adjustable

Die Cutting Machine Nick Grinding 220V

Product Description

Pneumatic angle nick grinder and Handheld Pneumatic nick grinder tools machine

Product Feature :

developed especially for grinding nicks in cutting dies. Pneumatic drive for high performance.The damaging of the rubber during grinding is prevented, performance of the diecutter is optimized.
simplified positioning for setting the nicks
 
Available grinding wheel size: 50x8mm or 50x10mm
Grinding Wheel Thickness: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.2mm,1.5mm,2.0mm,
 
Product Parameter : 

			Electricity voltage

			220V

			Maximum Torque

			Adjustable

			No-Load Speed

			0-24000RPM

			Color

			Yellow/Blue/Green

			Automatic Grade

			Semi-Automatic

			Packing

			1set/box

			Net Weight

			2.5kg

			Usage

			Die cutting Nick Grinding

			Dimension

			180*60*68mm

			Delivery tools

			4pcs

			Free grinding wheel per set

			10pcs

			Warranty service

			6 months

Advantage:

1. Versatile pneumatic powered nicking grinder produce clean, perpendicular nicks at consistent&adjustable depths.

2. Operating with less noise and vibration

3. Steady position of the devices on die-boards due to 4 removable pins below the base.

4. Nicks width from 0.2mm to 2.0mm by using different grinding distance thickness.
 
Manual Instructions1. Check the air source, air pressure stable or not 
 
2. Check the machine screws etc.
 
3. Change the grinding wheel according to needs, adjust the depth valve(If not use high precision position, pls lock the depth valve to the rock bottom position, which will do the nick grinding jobs according to the pressure power) 
 
4. Wear gloves, protective glass, masks 
 
5. Connect to air source( suggest to hang up the air hose)
 
6. Pls drop 3 drops pneumatic oil to the air inlet, plug in the air hose. Rotate to right to open the grinder. Then slowly idle for a few seconds, rotate to left to close 
 
7. Put the wooden die cutting board smoothly on the table(suggest not to use sponge rubber before nick grinding, as resistance increases) 
 
8. Rotate to right to open the grinder, increase the speed. Use thumb and first finger to hold the machine when the rotation speed gets stable. Then put the machine in the front side of the steel rules, move it to the grinding position(use wheels to adjust the position) and gently press the machine to start nicking. Move stably in turn. Pay attention that must gently press and handle 
 
9. After finish the nicking job, rotate to left to close. Unplug the air hose and use 3 drops pneumatic oil to the air inlet, then plug to the air hose and open the grinder to idling for a few seconds. After that close the air source, clean the machine body and keep in proper position 
 
Product Picture Show :

Tags:

Electricity voltage	220V
Maximum Torque	Adjustable
No-Load Speed	0-24000RPM
Color	Yellow/Blue/Green
Automatic Grade	Semi-Automatic
Packing	1set/box
Net Weight	2.5kg
Usage	Die cutting Nick Grinding
Dimension	1806068mm
Delivery tools	4pcs
Free grinding wheel per set	10pcs
Warranty service	6 months